[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-53-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #81-Ubuntu SMP Thu Aug 22 21:03:54 UTC 2013 (Ubuntu 3.2.0-53.81-generic 3.2.50)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000011ff0000 (usable)
[    0.000000]  BIOS-e820: 0000000011ff0000 - 0000000011ff3800 (reserved)
[    0.000000]  BIOS-e820: 0000000011ff3800 - 0000000012000000 (ACPI NVS)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: Compaq Armada                                     /0538, BIOS 1.35 03/15/2002
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x11ff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FF0000000 write-back
[    0.000000]   1 base 010000000 mask FFE000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-0000000011ff0000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0011c00000 page 2M
[    0.000000]  0011c00000 - 0011ff0000 page 4k
[    0.000000] kernel direct mapping tables up to 11ff0000 @ 1bf8000-1c00000
[    0.000000] RAMDISK: 10301000 - 11088000
[    0.000000] ACPI: RSDP 000f9970 00014 (v00 COMPAQ)
[    0.000000] ACPI: RSDT 11ff4800 00028 (v01 COMPAQ RSDB130  00000001 CPQ  00000001)
[    0.000000] ACPI: FACP 11ff4828 00074 (v01 COMPAQ CPQB10F  20020315 CPQ  00000001)
[    0.000000] ACPI: DSDT 11ff48a0 08886 (v01 COMPAQ ARMADAE7 00010000 MSFT 0100000C)
[    0.000000] ACPI: FACS 11fffe80 00040
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 287MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 11ff0000
[    0.000000]   low ram: 0 - 11ff0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00011ff0
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x00011ff0
[    0.000000] On node 0 totalpages: 73599
[    0.000000] free_area_init_node: node 0, pgdat c182bd40, node_mem_map d1daf200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 544 pages used for memmap
[    0.000000]   Normal zone: 69072 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x5008
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 12000000 (gap: 12000000:ee000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @d1d9e000 s31616 r0 d21632 u53248
[    0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 73023
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-53-generic root=UUID=65c7870b-2f8c-42fe-b4db-ca44dc0396a4 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 1179136 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 266560k/294848k available (5636k kernel code, 27836k reserved, 2780k data, 716k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xd27f0000 - 0xff7fe000   ( 720 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd1ff0000   ( 287 MB)
[    0.000000]       .init : 0xc1839000 - 0xc18ec000   ( 716 kB)
[    0.000000]       .data : 0xc1581284 - 0xc1838480   (2780 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1581284   (5636 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=d1808000 soft=d180a000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 365.887 MHz processor.
[    0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 731.77 BogoMIPS (lpj=1463548)
[    0.004048] pid_max: default: 32768 minimum: 301
[    0.004220] Security Framework initialized
[    0.004357] AppArmor: AppArmor initialized
[    0.004373] Yama: becoming mindful.
[    0.004779] Mount-cache hash table entries: 512
[    0.005624] Initializing cgroup subsys cpuacct
[    0.005672] Initializing cgroup subsys memory
[    0.005729] Initializing cgroup subsys devices
[    0.005750] Initializing cgroup subsys freezer
[    0.005768] Initializing cgroup subsys blkio
[    0.005816] Initializing cgroup subsys perf_event
[    0.005985] mce: CPU supports 5 MCE banks
[    0.006204] SMP alternatives: switching to UP code
[    0.040766] Freeing SMP alternatives: 24k freed
[    0.040913] ACPI: Core revision 20110623
[    0.062779] ACPI: setting ELCR to 0200 (from 0800)
[    0.064254] ftrace: allocating 25519 entries in 50 pages
[    0.072513] weird, boot CPU (#0) not listed by the BIOS.
[    0.072539] SMP motherboard not detected.
[    0.072555] Local APIC not detected. Using dummy APIC emulation.
[    0.072569] SMP disabled
[    0.072583] Performance Events: 
[    0.072599] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.072614] no hardware sampling interrupt available.
[    0.072634] p6 PMU driver.
[    0.072657] ... version:                0
[    0.072671] ... bit width:              32
[    0.072684] ... generic registers:      2
[    0.072698] ... value mask:             00000000ffffffff
[    0.072713] ... max period:             000000007fffffff
[    0.072727] ... fixed-purpose events:   0
[    0.072740] ... event mask:             0000000000000003
[    0.077197] NMI watchdog disabled (cpu0): not supported (no LAPIC?)
[    0.077494] Brought up 1 CPUs
[    0.077515] Total of 1 processors activated (731.77 BogoMIPS).
[    0.078995] devtmpfs: initialized
[    0.079895] EVM: security.selinux
[    0.079910] EVM: security.SMACK64
[    0.079923] EVM: security.capability
[    0.080316] PM: Registering ACPI NVS region at 11ff3800 (51200 bytes)
[    0.091653] print_constraints: dummy: 
[    0.091769] RTC time:  5:57:35, date: 03/23/19
[    0.092113] NET: Registered protocol family 16
[    0.093073] EISA bus registered
[    0.093345] ACPI: bus type pci registered
[    0.098742] PCI: PCI BIOS revision 2.10 entry at 0xf0478, last bus=1
[    0.098761] PCI: Using configuration type 1 for base access
[    0.109293] bio: create slab <bio-0> at 0
[    0.110049] ACPI: Added _OSI(Module Device)
[    0.110071] ACPI: Added _OSI(Processor Device)
[    0.110090] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.110110] ACPI: Added _OSI(Processor Aggregator Device)
[    0.116725] ACPI: EC: Look up EC in DSDT
[    0.173806] ACPI: Interpreter enabled
[    0.173859] ACPI: (supports S0 S1 S3 S4 S5)
[    0.174031] ACPI: Using PIC for interrupt routing
[    0.186131] ACPI: Power Resource [C13C] (on)
[    0.192462] ACPI: Power Resource [C0E5] (on)
[    0.727391] ACPI: Power Resource [C1A4] (off)
[    0.733438] ACPI: Power Resource [C1A6] (off)
[    0.740603] ACPI: Power Resource [C1A8] (off)
[    0.762452] ACPI: ACPI Dock Station Driver: 5 docks/bays found
[    0.762475] HEST: Table not found.
[    0.762512] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.787646] ACPI: PCI Root Bridge [C005] (domain 0000 [bus 00-ff])
[    0.838140] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.838167] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.838191] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.838215] pci_root PNP0A03:00: host bridge window [mem 0x12000000-0xfff7ffff] (ignored)
[    0.838239] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000effff] (ignored)
[    0.838315] pci 0000:00:00.0: [8086:7190] type 0 class 0x000600
[    0.838361] pci 0000:00:00.0: reg 10: [mem 0x50000000-0x53ffffff pref]
[    0.838530] pci 0000:00:01.0: [8086:7191] type 1 class 0x000604
[    0.838662] pci 0000:00:04.0: [104c:ac1b] type 2 class 0x000607
[    0.838718] pci 0000:00:04.0: reg 10: [mem 0x41100000-0x41100fff]
[    0.838794] pci 0000:00:04.0: supports D1 D2
[    0.838814] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.838840] pci 0000:00:04.0: PME# disabled
[    0.838910] pci 0000:00:04.1: [104c:ac1b] type 2 class 0x000607
[    0.838965] pci 0000:00:04.1: reg 10: [mem 0x41180000-0x41180fff]
[    0.839040] pci 0000:00:04.1: supports D1 D2
[    0.839059] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.839083] pci 0000:00:04.1: PME# disabled
[    0.839165] pci 0000:00:07.0: [8086:7110] type 0 class 0x000680
[    0.839364] pci 0000:00:07.1: [8086:7111] type 0 class 0x000101
[    0.839472] pci 0000:00:07.1: reg 20: [io  0x4010-0x401f]
[    0.839600] pci 0000:00:07.2: [8086:7112] type 0 class 0x000c03
[    0.839711] pci 0000:00:07.2: reg 20: [io  0x4020-0x403f]
[    0.839823] pci 0000:00:07.3: [8086:7113] type 0 class 0x000680
[    0.839845] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[    0.839856] * this clock source is slow. Consider trying other clock sources
[    0.840014] pci 0000:00:07.3: quirk: [io  0x5000-0x503f] claimed by PIIX4 ACPI
[    0.840040] pci 0000:00:07.3: quirk: [io  0x4000-0x400f] claimed by PIIX4 SMB
[    0.840086] pci 0000:00:07.3: PIIX4 devres C PIO at 0100-0107
[    0.840116] pci 0000:00:07.3: PIIX4 devres I PIO at 00e0-00e3
[    0.840139] pci 0000:00:07.3: PIIX4 devres J PIO at 00f8-00fb
[    0.840233] pci 0000:00:08.0: [125d:1978] type 0 class 0x000401
[    0.840288] pci 0000:00:08.0: reg 10: [io  0x4400-0x44ff]
[    0.840458] pci 0000:00:08.0: supports D1 D2
[    0.840477] pci 0000:00:08.0: PME# supported from D1 D2 D3hot
[    0.840501] pci 0000:00:08.0: PME# disabled
[    0.840569] pci 0000:00:09.0: [11c1:0449] type 0 class 0x000780
[    0.840624] pci 0000:00:09.0: reg 10: [mem 0x41200000-0x412000ff]
[    0.840662] pci 0000:00:09.0: reg 14: [io  0x2400-0x2407]
[    0.840698] pci 0000:00:09.0: reg 18: [io  0x2000-0x20ff]
[    0.840833] pci 0000:00:09.0: supports D2
[    0.840852] pci 0000:00:09.0: PME# supported from D2 D3hot D3cold
[    0.840876] pci 0000:00:09.0: PME# disabled
[    0.841046] pci 0000:01:00.0: [1002:4c4d] type 0 class 0x000300
[    0.841103] pci 0000:01:00.0: reg 10: [mem 0x40000000-0x40ffffff]
[    0.841139] pci 0000:01:00.0: reg 14: [io  0x3000-0x30ff]
[    0.841174] pci 0000:01:00.0: reg 18: [mem 0x41000000-0x41000fff]
[    0.841250] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.841339] pci 0000:01:00.0: supports D1 D2
[    0.841445] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.841472] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.841498] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x410fffff]
[    0.841702] pci_bus 0000:00: on NUMA node 0
[    0.841737] ACPI: PCI Interrupt Routing Table [\_SB_.C005._PRT]
[    0.842394] ACPI: PCI Interrupt Routing Table [\_SB_.C005.C012._PRT]
[    0.843345]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.904700] ACPI: PCI Interrupt Link [C187] (IRQs *11)
[    0.905354] ACPI: PCI Interrupt Link [C18D] (IRQs 11) *0, disabled.
[    0.906121] ACPI: PCI Interrupt Link [C18E] (IRQs *11)
[    0.906881] ACPI: PCI Interrupt Link [C18F] (IRQs *11)
[    0.907810] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.907833] vgaarb: loaded
[    0.907846] vgaarb: bridge control possible 0000:01:00.0
[    0.908881] i2c-core: driver [aat2870] using legacy suspend method
[    0.908899] i2c-core: driver [aat2870] using legacy resume method
[    0.909611] SCSI subsystem initialized
[    0.910030] libata version 3.00 loaded.
[    0.910429] usbcore: registered new interface driver usbfs
[    0.910533] usbcore: registered new interface driver hub
[    0.910768] usbcore: registered new device driver usb
[    0.911575] PCI: Using ACPI for IRQ routing
[    0.911602] PCI: pci_cache_line_size set to 32 bytes
[    0.911799] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.911820] reserve RAM buffer: 0000000011ff0000 - 0000000013ffffff 
[    0.912661] NetLabel: Initializing
[    0.912679] NetLabel:  domain hash size = 128
[    0.912693] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.912778] NetLabel:  unlabeled traffic allowed by default
[    0.913268] Switching to clocksource pit
[    0.978623] AppArmor: AppArmor Filesystem Enabled
[    0.978977] pnp: PnP ACPI init
[    0.979105] ACPI: bus type pnp registered
[    1.004568] pnp 00:00: [bus 00-ff]
[    1.004594] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.004615] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.004635] pnp 00:00: [io  0x0d00-0xffff window]
[    1.004657] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.004678] pnp 00:00: [mem 0x12000000-0xfff7ffff window]
[    1.004698] pnp 00:00: [mem 0x000d0000-0x000effff window]
[    1.005272] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    1.009585] pnp 00:01: [io  0x03f8-0x03ff]
[    1.009616] pnp 00:01: [irq 4]
[    1.010075] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[    1.014035] pnp 00:02: [io  0x03f0-0x03f5]
[    1.014057] pnp 00:02: [io  0x03f7]
[    1.014079] pnp 00:02: [irq 6]
[    1.014097] pnp 00:02: [dma 2]
[    1.014442] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.021970] pnp 00:03: [io  0x03e8-0x03ef]
[    1.021992] pnp 00:03: [io  0x0100-0x0107]
[    1.022015] pnp 00:03: [irq 3]
[    1.022033] pnp 00:03: [dma 5]
[    1.022865] pnp 00:03: Plug and Play ACPI device, IDs SMCf010 PNP0511 (active)
[    1.028316] pnp 00:04: [io  0x0378-0x037f]
[    1.028339] pnp 00:04: [io  0x0778-0x077a]
[    1.028361] pnp 00:04: [irq 7]
[    1.028398] pnp 00:04: [dma 3]
[    1.029227] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[    1.029424] pnp 00:05: [io  0x0010-0x001f]
[    1.029446] pnp 00:05: [io  0x0024-0x003d]
[    1.029465] pnp 00:05: [io  0x0050-0x0053]
[    1.029483] pnp 00:05: [io  0x0063]
[    1.029500] pnp 00:05: [io  0x0065]
[    1.029517] pnp 00:05: [io  0x0067]
[    1.029534] pnp 00:05: [io  0x0074-0x0077]
[    1.029552] pnp 00:05: [io  0x0090-0x0091]
[    1.029570] pnp 00:05: [io  0x0092]
[    1.029588] pnp 00:05: [io  0x0093-0x009f]
[    1.029605] pnp 00:05: [io  0x00a4-0x00bd]
[    1.029623] pnp 00:05: [io  0x00e0-0x00e3]
[    1.029973] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.030066] pnp 00:06: [io  0x00f0-0x00ff]
[    1.030090] pnp 00:06: [irq 13]
[    1.030314] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.030434] pnp 00:07: [io  0x0000-0x000f]
[    1.030456] pnp 00:07: [io  0x0080-0x008f]
[    1.030476] pnp 00:07: [io  0x00c0-0x00df]
[    1.030494] pnp 00:07: [dma 4]
[    1.030732] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.030889] pnp 00:08: [io  0x0061]
[    1.031123] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
[    1.031214] pnp 00:09: [io  0x0070-0x0071]
[    1.031236] pnp 00:09: [io  0x0072-0x0073]
[    1.031258] pnp 00:09: [irq 8]
[    1.031501] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.031591] pnp 00:0a: [io  0x0060]
[    1.031612] pnp 00:0a: [io  0x0064]
[    1.031631] pnp 00:0a: [irq 1]
[    1.031864] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.031953] pnp 00:0b: [irq 12]
[    1.032195] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[    1.032403] pnp 00:0c: [io  0x04d0-0x04d1]
[    1.032441] pnp 00:0c: [io  0x0800-0x087f]
[    1.032461] pnp 00:0c: [io  0x4000-0x400f]
[    1.032479] pnp 00:0c: [io  0x5000-0x5063]
[    1.032497] pnp 00:0c: [io  0x6004-0x6005]
[    1.032515] pnp 00:0c: [io  0xf000-0xf0cf]
[    1.032884] system 00:0c: [io  0x04d0-0x04d1] has been reserved
[    1.032910] system 00:0c: [io  0x0800-0x087f] has been reserved
[    1.032934] system 00:0c: [io  0x4000-0x400f] has been reserved
[    1.032958] system 00:0c: [io  0x5000-0x5063] could not be reserved
[    1.032980] system 00:0c: [io  0x6004-0x6005] has been reserved
[    1.033003] system 00:0c: [io  0xf000-0xf0cf] has been reserved
[    1.033030] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.034909] pnp 00:0d: [mem 0xfff80000-0xffffffff]
[    1.035419] system 00:0d: [mem 0xfff80000-0xffffffff] has been reserved
[    1.035451] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.037158] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[    1.037182] pnp 00:0e: [mem 0x000f0000-0x000fffff]
[    1.037202] pnp 00:0e: [mem 0x00100000-0x11ffffff]
[    1.037722] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[    1.037751] system 00:0e: [mem 0x000f0000-0x000fffff] could not be reserved
[    1.037776] system 00:0e: [mem 0x00100000-0x11ffffff] could not be reserved
[    1.037806] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.040614] pnp: PnP ACPI: found 15 devices
[    1.040631] ACPI: ACPI bus type pnp unregistered
[    1.040655] PnPBIOS: Disabled by ACPI PNP
[    1.092530] Switching to clocksource acpi_pm
[    1.092670] PCI: max bus depth: 1 pci_try_num: 2
[    1.092787] pci 0000:00:01.0: BAR 15: assigned [mem 0x14000000-0x140fffff pref]
[    1.092817] pci 0000:00:04.1: BAR 16: assigned [mem 0x18000000-0x1bffffff]
[    1.092845] pci 0000:00:04.1: BAR 15: assigned [mem 0x1c000000-0x1fffffff pref]
[    1.092874] pci 0000:00:04.1: BAR 14: assigned [io  0x1000-0x10ff]
[    1.092900] pci 0000:00:04.1: BAR 13: assigned [io  0x1400-0x14ff]
[    1.092925] pci 0000:00:04.0: BAR 16: assigned [mem 0x20000000-0x23ffffff]
[    1.092952] pci 0000:00:04.0: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
[    1.092979] pci 0000:00:04.0: BAR 14: assigned [io  0x1800-0x18ff]
[    1.093005] pci 0000:00:04.0: BAR 13: assigned [io  0x1c00-0x1cff]
[    1.093034] pci 0000:01:00.0: BAR 6: assigned [mem 0x14000000-0x1401ffff pref]
[    1.093060] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.093083] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    1.093112] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x410fffff]
[    1.093137] pci 0000:00:01.0:   bridge window [mem 0x14000000-0x140fffff pref]
[    1.093167] pci 0000:00:04.0: CardBus bridge to [bus 02-05]
[    1.093187] pci 0000:00:04.0:   bridge window [io  0x1c00-0x1cff]
[    1.093211] pci 0000:00:04.0:   bridge window [io  0x1800-0x18ff]
[    1.093237] pci 0000:00:04.0:   bridge window [mem 0x24000000-0x27ffffff pref]
[    1.093263] pci 0000:00:04.0:   bridge window [mem 0x20000000-0x23ffffff]
[    1.093288] pci 0000:00:04.1: CardBus bridge to [bus 06-09]
[    1.093307] pci 0000:00:04.1:   bridge window [io  0x1400-0x14ff]
[    1.093331] pci 0000:00:04.1:   bridge window [io  0x1000-0x10ff]
[    1.093356] pci 0000:00:04.1:   bridge window [mem 0x1c000000-0x1fffffff pref]
[    1.093382] pci 0000:00:04.1:   bridge window [mem 0x18000000-0x1bffffff]
[    1.094605] ACPI: PCI Interrupt Link [C187] enabled at IRQ 11
[    1.094627] PCI: setting IRQ 11 as level-triggered
[    1.094655] pci 0000:00:04.0: PCI INT A -> Link[C187] -> GSI 11 (level, low) -> IRQ 11
[    1.094705] pci 0000:00:04.1: PCI INT A -> Link[C187] -> GSI 11 (level, low) -> IRQ 11
[    1.094739] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    1.094762] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    1.094871] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.094894] pci_bus 0000:01: resource 1 [mem 0x40000000-0x410fffff]
[    1.094917] pci_bus 0000:01: resource 2 [mem 0x14000000-0x140fffff pref]
[    1.094940] pci_bus 0000:02: resource 0 [io  0x1c00-0x1cff]
[    1.094960] pci_bus 0000:02: resource 1 [io  0x1800-0x18ff]
[    1.094981] pci_bus 0000:02: resource 2 [mem 0x24000000-0x27ffffff pref]
[    1.095003] pci_bus 0000:02: resource 3 [mem 0x20000000-0x23ffffff]
[    1.095025] pci_bus 0000:06: resource 0 [io  0x1400-0x14ff]
[    1.095045] pci_bus 0000:06: resource 1 [io  0x1000-0x10ff]
[    1.095067] pci_bus 0000:06: resource 2 [mem 0x1c000000-0x1fffffff pref]
[    1.095088] pci_bus 0000:06: resource 3 [mem 0x18000000-0x1bffffff]
[    1.095417] NET: Registered protocol family 2
[    1.095882] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    1.097483] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    1.098113] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    1.098800] TCP: Hash tables configured (established 16384 bind 16384)
[    1.098819] TCP reno registered
[    1.098846] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    1.098937] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    1.099634] NET: Registered protocol family 1
[    1.099745] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.101280] ACPI: PCI Interrupt Link [C18F] enabled at IRQ 11
[    1.101320] pci 0000:00:07.2: PCI INT D -> Link[C18F] -> GSI 11 (level, low) -> IRQ 11
[    1.101377] pci 0000:00:07.2: PCI INT D disabled
[    1.101447] pci 0000:01:00.0: Boot video device
[    1.101469] PCI: CLS 32 bytes, default 32
[    1.103884] audit: initializing netlink socket (disabled)
[    1.103954] type=2000 audit(1553320656.096:1): initialized
[    1.263218] Trying to unpack rootfs image as initramfs...
[    1.431838] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.463756] VFS: Disk quotas dquot_6.5.2
[    1.464347] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.482258] fuse init (API version 7.17)
[    1.483186] msgmni has been set to 520
[    1.493913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.494270] io scheduler noop registered
[    1.494288] io scheduler deadline registered
[    1.494358] io scheduler cfq registered (default)
[    1.495374] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.495541] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.496737] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.497226] ACPI: AC Adapter [C105] (on-line)
[    1.498303] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.498345] ACPI: Sleep Button [C057]
[    1.498736] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.499022] ACPI: Lid Switch [C1AE]
[    1.499411] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.499441] ACPI: Power Button [PWRF]
[    1.503395] ACPI: Fan [C1A2] (off)
[    1.512507] ACPI: Fan [C1A5] (off)
[    1.515385] ACPI: Fan [C1A7] (off)
[    1.515656] Marking TSC unstable due to TSC halts in idle
[    1.515691] ACPI: acpi_idle registered with cpuidle
[    1.595538] thermal LNXTHERM:00: registered as thermal_zone0
[    1.595564] ACPI: Thermal Zone [C1A3] (41 C)
[    1.595847] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.595940] ACPI: Battery Slot [C10D] (battery present)
[    1.608163] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.608250] ACPI: Battery Slot [C10E] (battery absent)
[    1.608576] ERST: Table is not found!
[    1.608592] GHES: HEST is not enabled!
[    1.609436] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.630070] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.630463] isapnp: Scanning for PnP cards...
[    1.718262] ACPI: Battery Slot [C10E] (battery absent)
[    1.744641] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[    1.753724] ACPI: Battery Slot [C10D] (battery present)
[    1.848777] 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.876995] Linux agpgart interface v0.103
[    1.877652] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[    1.889868] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0x50000000
[    1.960923] brd: module loaded
[    1.974888] loop: module loaded
[    1.976154] ata_piix 0000:00:07.1: version 2.13
[    1.984559] scsi0 : ata_piix
[    1.985381] scsi1 : ata_piix
[    1.986597] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x4010 irq 14
[    1.986623] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x4018 irq 15
[    1.990495] Fixed MDIO Bus: probed
[    1.990684] tun: Universal TUN/TAP device driver, 1.6
[    1.990701] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.996468] PPP generic driver version 2.4.2
[    1.997311] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.997511] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.997620] uhci_hcd: USB Universal Host Controller Interface driver
[    1.997818] uhci_hcd 0000:00:07.2: PCI INT D -> Link[C18F] -> GSI 11 (level, low) -> IRQ 11
[    1.997880] uhci_hcd 0000:00:07.2: UHCI Host Controller
[    1.998260] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[    1.998369] uhci_hcd 0000:00:07.2: irq 11, io base 0x00004020
[    1.999554] hub 1-0:1.0: USB hub found
[    1.999594] hub 1-0:1.0: 2 ports detected
[    2.000491] usbcore: registered new interface driver libusual
[    2.000922] i8042: PNP: PS/2 Controller [PNP0303:C0E2,PNP0f0e:C0E3] at 0x60,0x64 irq 1,12
[    2.003322] i8042: Detected active multiplexing controller, rev 1.0
[    2.009354] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.009428] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.009793] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.010036] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.010262] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.016368] mousedev: PS/2 mouse device common for all mice
[    2.017786] rtc_cmos 00:09: RTC can wake from S4
[    2.018299] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[    2.018445] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    2.019064] device-mapper: uevent: version 1.0.3
[    2.019703] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    2.019899] EISA: Probing bus 0 at eisa.0
[    2.019936] Cannot allocate resource for EISA slot 1
[    2.019954] Cannot allocate resource for EISA slot 2
[    2.019971] Cannot allocate resource for EISA slot 3
[    2.019987] Cannot allocate resource for EISA slot 4
[    2.020004] Cannot allocate resource for EISA slot 5
[    2.020128] Cannot allocate resource for EISA slot 6
[    2.020163] EISA: Detected 0 cards.
[    2.020221] cpufreq-nforce2: No nForce2 chipset.
[    2.020442] cpuidle: using governor ladder
[    2.020763] cpuidle: using governor menu
[    2.020781] EFI Variables Facility v0.08 2004-May-17
[    2.022952] TCP cubic registered
[    2.024334] NET: Registered protocol family 10
[    2.042303] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.043232] NET: Registered protocol family 17
[    2.043295] Registering the dns_resolver key type
[    2.043425] Using IPI No-Shortcut mode
[    2.044734] PM: Hibernation image not present or could not be loaded.
[    2.044818] registered taskstats version 1
[    2.231295] ata1.00: ATA-6: HTS541040G9AT00, MB2IA60A, max UDMA/100
[    2.231325] ata1.00: 78140160 sectors, multi 16: LBA 
[    2.231376] ata1.01: ATAPI: DW-224E-A, A.2F, max MWDMA2
[    2.281180] ata1.00: configured for UDMA/33
[    2.332717] isapnp: No Plug & Play device found
[    2.373008] ata1.01: configured for MWDMA2
[    2.374277] scsi 0:0:0:0: Direct-Access     ATA      HTS541040G9AT00  MB2I PQ: 0 ANSI: 5
[    2.375543] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.382504] scsi 0:0:1:0: CD-ROM            TEAC     DW-224E-A        A.2F PQ: 0 ANSI: 5
[    2.386844] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    2.387539] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    2.387564] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.388573] sd 0:0:0:0: [sda] Write Protect is off
[    2.388601] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.388816] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.389677] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    2.391483] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    2.796677]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    2.805260] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.318708] Freeing initrd memory: 13852k freed
[    4.489066]   Magic number: 11:679:972
[    4.489493] rtc_cmos 00:09: setting system clock to 2019-03-23 05:57:39 UTC (1553320659)
[    4.489617] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.489634] EDD information not available.
[    4.490535] Freeing unused kernel memory: 716k freed
[    4.495900] Write protecting the kernel text: 5640k
[    4.496407] Write protecting the kernel read-only data: 2332k
[    4.643850] udevd[84]: starting version 175
[    6.033041] Floppy drive(s): fd0 is 1.44M
[    6.050235] FDC 0 is a post-1991 82077
[   21.742805] Adding 983036k swap on /dev/sda7.  Priority:-1 extents:1 across:983036k 
[   22.017372] udevd[310]: starting version 175
[   22.396245] lp: driver loaded but no devices found
[   24.401510] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   24.413397] yenta_cardbus 0000:00:04.0: CardBus bridge found [0e11:b113]
[   24.413451] yenta_cardbus 0000:00:04.0: Enabling burst memory read transactions
[   24.413477] yenta_cardbus 0000:00:04.0: Using CSCINT to route CSC interrupts to PCI
[   24.413497] yenta_cardbus 0000:00:04.0: Routing CardBus interrupts to PCI
[   24.413524] yenta_cardbus 0000:00:04.0: TI: mfunc 0x00000000, devctl 0x64
[   24.672777] yenta_cardbus 0000:00:04.0: ISA IRQ mask 0x04b8, PCI irq 11
[   24.672806] yenta_cardbus 0000:00:04.0: Socket status: 30000020
[   24.712375] yenta_cardbus 0000:00:04.1: CardBus bridge found [0e11:b113]
[   24.712434] yenta_cardbus 0000:00:04.1: Using CSCINT to route CSC interrupts to PCI
[   24.712456] yenta_cardbus 0000:00:04.1: Routing CardBus interrupts to PCI
[   24.712482] yenta_cardbus 0000:00:04.1: TI: mfunc 0x00000000, devctl 0x64
[   24.960777] yenta_cardbus 0000:00:04.1: ISA IRQ mask 0x04b8, PCI irq 11
[   24.960806] yenta_cardbus 0000:00:04.1: Socket status: 30000006
[   25.134982] ppdev: user-space parallel port driver
[   25.233815] Bluetooth: Core ver 2.16
[   25.240143] NET: Registered protocol family 31
[   25.240170] Bluetooth: HCI device and connection manager initialized
[   25.240194] Bluetooth: HCI socket layer initialized
[   25.240210] Bluetooth: L2CAP socket layer initialized
[   25.240271] Bluetooth: SCO socket layer initialized
[   25.264428] parport_pc 00:04: reported by Plug and Play ACPI
[   25.264504] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[   25.361799] lp0: using parport0 (interrupt-driven).
[   25.373155] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.373179] Bluetooth: BNEP filters: protocol multicast
[   25.448259] Bluetooth: RFCOMM TTY layer initialized
[   25.448302] Bluetooth: RFCOMM socket layer initialized
[   25.448319] Bluetooth: RFCOMM ver 1.11
[   25.580173] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[   25.580263] pci 0000:02:00.0: [168c:001d] type 0 class 0x000200
[   25.580330] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x0000ffff]
[   25.580566] pci 0000:02:00.0: BAR 0: assigned [mem 0x20000000-0x2000ffff]
[   25.580601] pci 0000:02:00.0: BAR 0: set to [mem 0x20000000-0x2000ffff] (PCI address [0x20000000-0x2000ffff])
[   25.955774] type=1400 audit(1553317080.961:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=526 comm="apparmor_parser"
[   26.005335] type=1400 audit(1553317081.013:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=526 comm="apparmor_parser"
[   27.791634] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x4000, revision 0
[   27.948954] irda_init()
[   27.949058] NET: Registered protocol family 23
[   28.032654] found SMC SuperIO Chip (devid=0x0a rev=00 base=0x00e0): FDC37N971
[   28.032702] smsc_ircc_present: can't get sir_base of 0x3e8
[   28.451926] psmouse serio2: hgpk: ID: 10 00 64
[   28.541766] psmouse serio2: logips2pp: Detected unknown Logitech mouse model 74
[   29.105978] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio2/input/input4
[   29.364167] psmouse serio4: hgpk: ID: 10 00 64
[   29.707062] IBM TrackPoint firmware: 0x0b, buttons: 3/3
[   29.725971] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/input/input5
[   30.139072] type=1400 audit(1553317085.145:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=718 comm="apparmor_parser"
[   30.143146] type=1400 audit(1553317085.149:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=718 comm="apparmor_parser"
[   30.150420] type=1400 audit(1553317085.157:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=718 comm="apparmor_parser"
[   30.203164] type=1400 audit(1553317085.209:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=719 comm="apparmor_parser"
[   30.289162] Linux video capture interface: v2.00
[   31.356850] init: failsafe main process (731) killed by TERM signal
[   32.751030] type=1400 audit(1553317087.757:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=839 comm="apparmor_parser"
[   32.766228] type=1400 audit(1553317087.773:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=839 comm="apparmor_parser"
[   32.847985] type=1400 audit(1553317087.853:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=842 comm="apparmor_parser"
[   32.855995] type=1400 audit(1553317087.861:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=842 comm="apparmor_parser"
[   32.874329] ACPI: PCI Interrupt Link [C18E] enabled at IRQ 11
[   32.874370] snd_es1968 0000:00:08.0: PCI INT A -> Link[C18E] -> GSI 11 (level, low) -> IRQ 11
[   32.880224] type=1400 audit(1553317087.889:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=842 comm="apparmor_parser"
[   33.331187] type=1400 audit(1553317088.337:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=844 comm="apparmor_parser"
[   33.432823] type=1400 audit(1553317088.441:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=844 comm="apparmor_parser"
[   33.465072] type=1400 audit(1553317088.473:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=844 comm="apparmor_parser"
[   33.495863] type=1400 audit(1553317088.501:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=844 comm="apparmor_parser"
[   33.552832] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x100-0x107 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[   33.554069] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3e8-0x3ff 0x4d0-0x4d7
[   33.554657] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: excluding 0x820-0x87f
[   33.555053] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   33.555618] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xf0000-0xfffff
[   33.555822] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[   33.562893] type=1400 audit(1553317088.569:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=844 comm="apparmor_parser"
[   33.653241] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x100-0x107 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[   33.654481] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3e8-0x3ff 0x4d0-0x4d7
[   33.655069] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: excluding 0x820-0x87f
[   33.655463] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[   33.696200] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[   33.696525] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   33.760242] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xf0000-0xfffff
[   33.760594] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[   33.760795] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean.
[   33.760998] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[   34.138382] input: ES1978 as /devices/pci0000:00/0000:00:08.0/input/input6
[   34.200450] es1968: clocking to 48000
[   34.884223] cfg80211: Calling CRDA to update world regulatory domain
[   36.813962] cfg80211: World regulatory domain updated:
[   36.813989] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   36.814015] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   36.814038] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   36.814061] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   36.814083] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   36.814105] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.128330] ath5k 0000:02:00.0: enabling device (0000 -> 0002)
[   37.128393] ath5k 0000:02:00.0: PCI INT A -> Link[C187] -> GSI 11 (level, low) -> IRQ 11
[   37.128690] ath5k 0000:02:00.0: registered as 'phy0'
[   37.654266] ath: EEPROM regdomain: 0x809c
[   37.654287] ath: EEPROM indicates we should expect a country code
[   37.654304] ath: doing EEPROM country->regdmn map search
[   37.654320] ath: country maps to regdmn code: 0x52
[   37.654335] ath: Country alpha2 being used: CN
[   37.654349] ath: Regpair used: 0x52
[   37.654370] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   37.654397] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.654417] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   37.654441] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.654461] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   37.654485] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.654504] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   37.654529] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.654548] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   37.654572] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.654591] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   37.654616] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.654635] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   37.654660] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.654679] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   37.654703] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.654722] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   37.654747] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.654766] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   37.654790] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.654810] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   37.654834] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.654853] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   37.654874] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   37.654895] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   37.660529] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   37.660563] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.660585] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   37.660610] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.660630] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   37.660655] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.660675] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   37.660699] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.660719] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   37.660744] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.660763] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   37.660788] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.660808] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   37.660832] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.660852] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   37.660877] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.660897] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   37.660921] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.660941] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   37.660966] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.660986] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   37.661010] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.661030] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   37.661055] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   37.661075] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   37.661099] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   37.661119] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   37.661144] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   37.710387] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   37.725377] cfg80211: Calling CRDA for country: CN
[   37.733030] ath5k phy0: Atheros AR2417 chip found (MAC: 0xf0, PHY: 0x70)
[   37.939804] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   37.939838] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.939859] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   37.939884] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.939904] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   37.939929] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.939948] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   37.939973] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.939992] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   37.940123] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.940146] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   37.940171] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.940191] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   37.940215] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.940235] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   37.940259] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.940279] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   37.940304] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.940323] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   37.940348] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.940367] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   37.940392] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.940411] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   37.940436] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.940455] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   37.940480] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   37.940498] cfg80211: Disabling freq 2484 MHz
[   37.940524] cfg80211: Regulatory domain changed to country: CN
[   37.940540] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   37.940563] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   37.940583] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   38.400368] vesafb: mode is 1024x768x24, linelength=3072, pages=0
[   38.400392] vesafb: scrolling: redraw
[   38.400416] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[   38.402320] vesafb: framebuffer at 0x40000000, mapped to 0xd2d80000, using 2304k, total 2304k
[   38.410870] Console: switching to colour frame buffer device 128x48
[   38.411093] fb0: VESA VGA frame buffer device
[   39.449013] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   39.453802] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  131.603018] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[  253.915495] wlan0: authenticate with 34:81:c4:0b:8e:e6 (try 1)
[  253.920802] wlan0: authenticated
[  253.939559] wlan0: associate with 34:81:c4:0b:8e:e6 (try 1)
[  253.945781] wlan0: RX AssocResp from 34:81:c4:0b:8e:e6 (capab=0x1431 status=0 aid=1)
[  253.945812] wlan0: associated
[  253.949483] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  253.955257] cfg80211: Calling CRDA for country: DE
[  254.086248] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  254.086284] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  254.086305] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  254.086330] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  254.086350] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  254.086374] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  254.086393] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  254.086418] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  254.086437] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  254.086462] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  254.086481] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  254.086505] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  254.086524] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  254.086549] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  254.086568] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  254.086592] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  254.086611] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  254.086635] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  254.086655] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  254.086679] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  254.086698] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  254.086722] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  254.086742] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[  254.086766] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  254.086785] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  254.086809] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  254.086827] cfg80211: Disabling freq 2484 MHz
[  254.086854] cfg80211: Regulatory domain changed to country: DE
[  254.086869] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  254.086892] cfg80211:     (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  254.086913] cfg80211:     (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  254.086933] cfg80211:     (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  254.086953] cfg80211:     (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[  300.064911] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[  590.728711] AtariSIO kernel driver V1.07 (c) 2002-2019 Matthias Reichl
[  590.728736] atarisio: please supply port or io and irq parameters
[ 1346.625518] wlan0: deauthenticating from 34:81:c4:0b:8e:e6 by local choice (reason=3)
[ 1346.632929] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 1346.632969] cfg80211: Restoring regulatory settings
[ 1346.632999] cfg80211: Calling CRDA to update world regulatory domain
[ 1346.759764] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 1346.759800] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1346.759821] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 1346.759846] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1346.759866] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 1346.759890] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1346.759910] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 1346.759934] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1346.759954] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 1346.759978] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1346.759997] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 1346.760201] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1346.760224] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 1346.760249] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1346.760269] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 1346.760294] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1346.760314] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 1346.760338] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1346.760358] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 1346.760382] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1346.760402] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 1346.760427] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1346.760446] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 1346.760471] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1346.760490] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 1346.760515] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1346.760533] cfg80211: Disabling freq 2484 MHz
[ 1346.760558] cfg80211: World regulatory domain updated:
[ 1346.760574] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1346.760598] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1346.760620] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1346.760642] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1346.760664] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1346.760687] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1349.147428] show_signal_msg: 21 callbacks suppressed
[ 1349.147459] ntpd[1713]: segfault at 4 ip 00ee3741 sp bfa48ce0 error 4 in ntpd[ecf000+95000]
[ 1352.256247] PM: Syncing filesystems ... done.
[ 1352.277011] PM: Preparing system for mem sleep
[ 1352.277080] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1352.292238] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1352.308209] PM: Entering mem sleep
[ 1352.308299] Suspending console(s) (use no_console_suspend to debug)
[ 1352.309709] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1352.343110] parport_pc 00:04: disabled
[ 1352.349284] serial 00:01: disabled
[ 1352.356461] snd_es1968 0000:00:08.0: PCI INT A disabled
[ 1352.376868] sd 0:0:0:0: [sda] Stopping disk
[ 1352.380273] uhci_hcd 0000:00:07.2: PCI INT D disabled
[ 1352.818914] PM: suspend of drv:sd dev:0:0:0:0 complete after 509.220 msecs
[ 1352.818988] PM: suspend of drv:scsi dev:target0:0:0 complete after 509.079 msecs
[ 1352.819048] PM: suspend of drv:scsi dev:host0 complete after 478.512 msecs
[ 1352.819422] PM: suspend of drv:ata_piix dev:0000:00:07.1 complete after 462.494 msecs
[ 1352.819486] PM: suspend of drv: dev:pci0000:00 complete after 459.243 msecs
[ 1352.819528] PM: suspend of devices complete after 510.646 msecs
[ 1352.819547] PM: suspend devices took 0.508 seconds
[ 1352.833737] uhci_hcd 0000:00:07.2: wake-up capability enabled by ACPI
[ 1352.834492] PM: late suspend of devices complete after 14.922 msecs
[ 1352.834785] ACPI: Preparing to enter system sleep state S3
[ 1352.837051] PM: Saving platform NVS memory
[ 1352.837425] Disabling non-boot CPUs ...
[ 1352.837425] ACPI: Low-level resume complete
[ 1352.837425] PM: Restoring platform NVS memory
[ 1352.840696] ACPI: Waking up from system sleep state S3
[ 1352.847113] agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x22100006, writing 0xa2100006)
[ 1352.847183] pci 0000:00:01.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x14001400)
[ 1352.847211] pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2a03030, writing 0x22a03030)
[ 1352.847245] pci 0000:00:01.0: restoring config space at offset 0x1 (was 0x2200003, writing 0x2200007)
[ 1352.847575] uhci_hcd 0000:00:07.2: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[ 1352.847615] uhci_hcd 0000:00:07.2: restoring config space at offset 0x8 (was 0x1, writing 0x4021)
[ 1352.847650] uhci_hcd 0000:00:07.2: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[ 1352.847679] uhci_hcd 0000:00:07.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[ 1352.847871] uhci_hcd 0000:00:07.2: wake-up capability disabled by ACPI
[ 1353.560272] ath5k 0000:02:00.0: restoring config space at offset 0xf (was 0x1c0a0100, writing 0x1c0a010b)
[ 1353.560326] ath5k 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0x20000000)
[ 1353.560352] ath5k 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0xa808)
[ 1353.560381] ath5k 0000:02:00.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900006)
[ 1353.560578] PM: early resume of devices complete after 714.008 msecs
[ 1353.561128] uhci_hcd 0000:00:07.2: PCI INT D -> Link[C18F] -> GSI 11 (level, low) -> IRQ 11
[ 1353.561185] usb usb1: root hub lost power or was reset
[ 1353.561270] snd_es1968 0000:00:08.0: PCI INT A -> Link[C18E] -> GSI 11 (level, low) -> IRQ 11
[ 1353.562040] sd 0:0:0:0: [sda] Starting disk
[ 1353.644713] serial 00:01: activated
[ 1353.654610] parport_pc 00:04: activated
[ 1353.680204] PM: resume of drv:hub dev:1-0:1.0 complete after 118.250 msecs
[ 1353.680262] PM: resume of drv: dev:ep_00 complete after 118.266 msecs
[ 1353.680305] PM: resume of drv: dev:ep_81 complete after 118.333 msecs
[ 1353.748651] ata1.00: configured for UDMA/33
[ 1353.756309] ata1.01: configured for MWDMA2
[ 1354.094525] PM: resume of drv:snd_es1968 dev:0000:00:08.0 complete after 533.273 msecs
[ 1354.152235] PM: resume of drv:i8042 aux dev:00:0b complete after 497.515 msecs
[ 1354.159467] PM: resume of drv:sd dev:0:0:0:0 complete after 597.424 msecs
[ 1354.159671] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 597.509 msecs
[ 1354.162385] ath5k 0000:02:00.0: PME# disabled
[ 1354.165197] ath5k 0000:02:00.0: PCI INT A disabled
[ 1354.165387] pci 0000:02:00.0: [168c:001d] type 0 class 0x000200
[ 1354.165453] pci 0000:02:00.0: reg 10: [mem 0x20000000-0x2000ffff]
[ 1354.165687] pci 0000:02:00.0: BAR 0: assigned [mem 0x20000000-0x2000ffff]
[ 1354.165719] pci 0000:02:00.0: BAR 0: set to [mem 0x20000000-0x2000ffff] (PCI address [0x20000000-0x2000ffff])
[ 1354.166334] ath5k 0000:02:00.0: PCI INT A -> Link[C187] -> GSI 11 (level, low) -> IRQ 11
[ 1354.166627] ath5k 0000:02:00.0: registered as 'phy1'
[ 1354.670681] ath: EEPROM regdomain: 0x809c
[ 1354.670696] ath: EEPROM indicates we should expect a country code
[ 1354.670710] ath: doing EEPROM country->regdmn map search
[ 1354.670723] ath: country maps to regdmn code: 0x52
[ 1354.670737] ath: Country alpha2 being used: CN
[ 1354.670748] ath: Regpair used: 0x52
[ 1354.670768] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.670791] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1354.670808] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.670829] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1354.670845] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.670867] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1354.670883] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.670904] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1354.670921] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.670942] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1354.670958] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.670979] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1354.670996] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671017] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1354.671033] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671054] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1354.671071] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671092] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1354.671108] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671129] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1354.671146] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671167] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1354.671184] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 1354.671201] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 1354.671218] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 1354.671480] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671504] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1354.671523] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671544] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1354.671562] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671583] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1354.671600] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671621] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1354.671638] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671659] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1354.671676] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671697] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1354.671714] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671736] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1354.671753] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671774] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1354.671791] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671812] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1354.671829] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671850] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1354.671868] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671889] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1354.671906] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671927] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1354.671944] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.671965] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1354.671983] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 1354.672004] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1354.672709] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 1354.677263] ath5k phy1: Atheros AR2417 chip found (MAC: 0xf0, PHY: 0x70)
[ 1354.677580] cfg80211: Calling CRDA for country: CN
[ 1354.816505] PM: resume of devices complete after 1255.835 msecs
[ 1354.817013] PM: resume devices took 1.256 seconds
[ 1354.817334] PM: Finishing wakeup.
[ 1354.817348] Restarting tasks ... done.
[ 1355.367706] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 1355.367742] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1355.367764] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 1355.367788] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1355.367808] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 1355.367832] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1355.367852] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 1355.367876] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1355.367896] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 1355.367920] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1355.367939] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 1355.367964] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1355.367983] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 1355.368007] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1355.368170] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 1355.368198] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1355.368218] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 1355.368242] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1355.368262] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 1355.368286] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1355.368306] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 1355.368330] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1355.368350] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 1355.368374] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1355.368394] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 1355.368418] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1355.368436] cfg80211: Disabling freq 2484 MHz
[ 1355.368462] cfg80211: Regulatory domain changed to country: CN
[ 1355.368478] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1355.368501] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1355.368521] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 1355.476672] psmouse serio2: hgpk: ID: 10 00 64
[ 1355.562557] psmouse serio2: logips2pp: Detected unknown Logitech mouse model 74
[ 1357.984343] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1357.989507] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1359.651572] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy1
[ 1361.427236] wlan0: authenticate with 34:81:c4:0b:8e:e6 (try 1)
[ 1361.444689] wlan0: authenticated
[ 1361.463455] wlan0: associate with 34:81:c4:0b:8e:e6 (try 1)
[ 1361.476174] wlan0: RX AssocResp from 34:81:c4:0b:8e:e6 (capab=0x1431 status=0 aid=1)
[ 1361.476204] wlan0: associated
[ 1361.481420] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1361.490675] cfg80211: Calling CRDA for country: DE
[ 1361.617552] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 1361.617588] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1361.617609] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 1361.617634] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1361.617654] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 1361.617679] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1361.617698] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 1361.617722] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1361.617742] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 1361.617766] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1361.617786] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 1361.617810] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1361.617829] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 1361.617854] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1361.617873] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 1361.617898] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1361.617917] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 1361.617941] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1361.617961] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 1361.617985] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1361.618004] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 1361.618029] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1361.618048] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 1361.618072] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1361.618092] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 1361.618117] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 1361.618135] cfg80211: Disabling freq 2484 MHz
[ 1361.618162] cfg80211: Regulatory domain changed to country: DE
[ 1361.618178] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1361.618201] cfg80211:     (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1361.618222] cfg80211:     (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1361.618242] cfg80211:     (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1361.618263] cfg80211:     (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 1378.083534] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy1
[ 1619.700139] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 1620.076255] usbcore: registered new interface driver usbserial
[ 1620.076428] USB Serial support registered for generic
[ 1620.082649] usbcore: registered new interface driver usbserial_generic
[ 1620.082674] usbserial: USB Serial Driver core
[ 1620.108824] USB Serial support registered for FTDI USB Serial Device
[ 1620.114874] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 1620.115466] usb 1-1: Detected FT232RL
[ 1620.115489] usb 1-1: Number of endpoints 2
[ 1620.115507] usb 1-1: Endpoint 1 MaxPacketSize 64
[ 1620.115525] usb 1-1: Endpoint 2 MaxPacketSize 64
[ 1620.115541] usb 1-1: Setting MaxPacketSize 64
[ 1620.119524] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1620.126158] usbcore: registered new interface driver ftdi_sio
[ 1620.126187] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
